|
The iGNiUS
range of remote radio control hit boxes offer superior functionality and are
packed with features so that you can always be sure the device to be controlled
will activate or fire. Not only can these units be used as a wireless remote
control system, but as personal hit boxes as well, all in one package. They are
available in 8 Channel or 16 Channel versions.
We are the only
manufacturers of hitboxes that also make commercial explosives initiation
systems for the quarrying, mining and explosive ordinance disposal industries -
you can be sure that our hitboxes are designed to the highest safety
standards.
The hit boxes can fire pyrotechnical detonators,
pyrotechnical effects, 24V valves, and 24V relays for special effects on film
and television sets. For more information, please use the email address shown
in contact |
|
Common Key
Features -
· 8 or 16 Channels at 24V output, all solid state
switching
· Intelligent Continuity Tester
· Manual and
sequence firing
· User replaceable batteries - easily
obtainable
· Very compact size
· Low Battery & In Range
indicators
· Up to 500m line of sight range
· Operation in
the licence free ISM bands
The hit box kit comes complete with two sets
of batteries, antenna, connectors, remote firing switch and storage case. No
additional equipment is required and they are ready to operate from
delivery.
Click Here to Return to Special
Effects Control and Firing Systems |
|
Useful
Accessories -
Micro Hit Box Receiver -
· 1 Channel ultra
small hit box receiver
· For use where space is a premium
·
50x57x26mm, 80g
· Operates from 1 x CR123A 3V battery
1
Channel Solid State Relay Interface with Pyro Output -
· Allows
the hit boxes to switch large loads
· Switch Output Time 0.5 - 15.0
Seconds
· 12-24V operation, 15A Switch Capacity
· Pyro
Output Channel
· Reverse Polarity / Short Circuit
Protected
· 66x57x26mm, 75g
8 Channel Hitbox Output Tester
-
· For testing the output of RC Personal Hitbox's
· 7
Ohm dummy load
· Bright LED to show channel has fired and supplied
power |
